image of the Mingming Li

Mingming Li

New York NY, 10008 | (861)063-9420

Blog of Mingming Li all posts

subscribe
Introduction of G series MONO screw pump
Posted on:Tuesday, December 2, 2014


G series MONO screw pump


1. slight wear and long life


2. small vibration and low noise


3. high pressure and efficiency


4. simple structure,easy disassemble and assembly


5. small volume and light weight


Brief introduction: G single screw pump belongs to the rotor type positive displacement pump, it is depend on the screw meshing with liner on the discharge and suction cavity to conveying liquid volume change.It is a kind of method of pressurized screw pump, a main working parts by bushing has a double helix cavity (stator) and the stator cavity and its meshing single-head screw screw (rotor).When the input shaft through the universal joint drive making planets revolving around the center of the stator, rotor stator, rotor, vice is continuous mesh form sealed cavity, the seal chamber volume invariably uniform axial movement, the medium from the suction end of deputy to the stator, rotor pressure side, the suction medium sealed cavity through the stator without stirring and destruction.


Application scope: Petro-industry 

Chemical industry and Pharmacy 

Environment industry 

Mineral products engineering industry 

Food industry 

Papermaking industry


Mono screw pump Feature: 1 .Temp:below 150C 2. Visc: 3-760cst 3. pressure:0.6-2.5mpa 

4. high efficiency




 
 
go

Back to Top